9-3 (9440) V6-2.8L Turbo (2008)
Water Pump: Service and Repair
Coolant pump
To remove
Warning
The cooling system is under pressure. Hot coolant and steam can escape.
^
Open the cap slowly to release the pressure.
^
Carelessness can cause eye and burn injuries
1. Take the cap off the expansion tank to release any pressure.
2. Raise the car.
3. Undo the right-hand side of the spoiler shield.
4. Place a suitable receptacle under the radiator. Connect a hose to the radiator and drain the coolant. Close the cock and refit the spoiler shield.
5. CV: Remove Chassis reinforcement, front subframe, CV
6. Fit 83 96 145 centering tool, subframe - engine and 83 96 152 centering tool, power train with 32 025 059 Support. First remove the two long
supports. Relieve the load on the engine.