9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-1290001.png)
Muffler: Service and Repair
Rear Silencer
Rear silencer
To remove
1. Raise the car.
2. Cut the exhaust pipe to the specified measurement - 130 mm on the side to be replaced. Cut the pipe perpendicularly. Use 83 95 667 Pipe cutter/
exhaust system.
3. Remove the rear silencer.
To fit
1. Clean the cut to remove burrs and dirt.
2. Fit the joint clamp to the pipe. The opening should face the rear.
