9-3 (9440) V6-2.8L Turbo (2008)
Air Door Actuator / Motor: Service and Repair
Right Mixed Air Stepping Motor
Right Mixed Air Stepping Motor
To remove
1. Remove the glove box.
2. Dismantle the floor console's front side panel on the passenger side.
3. Dismantle the acoustic insulation on the passenger side.
4. Dismantle the air duct for the floor vent and lift out the air duct through the hole for the glove box. The stepping motor for the right hand mixed air
is the lower stepping motor.
5. Dismantle the stepping motor's connector by pressing in the lock and pulling out the connector.