9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-1613001.png)
Knock Sensor: Service and Repair
Knock Sensor, Rear Cylinder Bank (516R), 4WD
Knock Sensor, Rear Cylinder Bank (516R), 4WD
To remove
1. Raise the car.
2. Remove Alternator, B284, 4WD (LHD) or Alternator, B284, 4WD, (RHD)
3. Remove Rear catalytic converter, B284, 4WD.
4. Unplug the oil level sensor (A) connector and remove the cable fixing (B).
5. Remove the bracket (C) between the front exhaust pipe and engine.
6. Remove the pipe holder bolt (A).