9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-1766006.png)
3. Engage neutral, fit 87 92 467 Adjustment tool, gear selector position sensor. Undo the bolts for the gear selector position sensor and adjust it so
that the line is visible in the middle of the adjustment tool groove. Tighten the bolts.
Tightening torque 25 Nm (18 ft. lbs.)
4. Remove the adjustment tool.
5. Fit the gear selector lever.
Tightening torque 20 Nm (15 ft. lbs.)
6. Fit the oil cooler with new O-rings.
Tightening torque 24 Nm (18 ft. lbs.)
