9-3 (9440) V6-2.8L Turbo (2008)
Camshaft Position Sensor: Service and Repair
Position Sensor, Intake Camshaft, Front Cylinder Bank (555F)
Position Sensor, Intake Camshaft, Front Cylinder Bank (555F)
To remove
WARNING:
The cooling system is under pressure. Hot coolant and steam can escape.
^
Open the cap slowly to release the pressure.
^
Carelessness can cause eye and burn injuries
1. Drain the coolant
2. Lower the car.
3. Remove the upper engine cover.
4. Detach the turbocharger intake hose.
IMPORTANT: When removing the air cleaner casing cover, be careful not to damage the brake vacuum pump sensor.