saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

ABOUT US
The Ignition Key Cannot Be Turned to the Lock Position|Page 7497 > < The Ignition Key Cannot Be Turned to the Lock Position|Page 7495

9-3 (9440) V6-2.8L Turbo (2008)

Page 1
background image

Ignition Switch: Testing and Inspection
Key Cannot Be Turned From OFF to LOCK

Key Cannot Be Turned From OFF To LOCK

Fault symptom

Key cannot be turned from OFF to LOCK

Conditions

No DTCs stored with the fault symptom in question.

Battery voltage greater than 9 V.

Diagnostic help

This symptom can arise if system voltage is low.

IMPORTANT:  If DTCs are cleared before the fault is remedied, important information on the cause of the fault may be lost and the system
may not be able to detect the cause of the fault again.

The Ignition Key Cannot Be Turned to the Lock Position|Page 7497 > < The Ignition Key Cannot Be Turned to the Lock Position|Page 7495