9-3 (9440) V6-2.8L Turbo (2008)
1. Position the control module on the insulation and fit a cable tie.
2. Plug in the connector and position the control module.
3. 4D/5D: Reposition the right corner of the rear carpeting.
IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further
information regarding connectors, refer to Connectors, handling and inspection.
4. 4D/5D: Fit the right front seat.
CV: Fit the seat cushion of the rear seat.