9-3 (9440) V6-2.8L Turbo (2008)
10. Remove the knock sensor (B).
To fit
1. Fit the knock sensor (B) at the angle illustrated and tighten it to the correct torque.
Tightening torque 23 Nm (17 ft. lbs.)
2. Plug in the connector (A).
3. Fit the heat shield bolts (B).
Tightening torque to heat shield:
M6 9 Nm (6 ft. lbs.)
M1O 38 Nm (28 ft. lbs.)