9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-399038.png)
2. Plug in the position sensor cable.
Important: Cables to hydraulic lines and position sensors must be refitted as they were earlier or there will be a risk of them being
damaged when the soft top and soft top cover are operated.
3. Fit the cable ties for the hose package and the sensor.
4. Remove the soft top support.
5. Test the operation of the soft top.
6. Connect the diagnostics tool and erase any diagnostic trouble code.
Position Sensor, Soft Top Locked, Check
Position Sensor, Soft Top Locked, Check
1. Remove Soft top cover.
2. Check that the sensor is correctly fitted in the holder and that the sensor has not moved backward.
