saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

ABOUT US
Position Sensor, First Bow Locked (561c)|Page 1532 > < Position Sensor, First Bow Locked (561c)|Page 1530

9-3 (9440) V6-2.8L Turbo (2008)

Page 44
background image

3. Remove the pin from the cylinder piston rod.
4. Remove the clip from the outer fastening pin in the hydraulic cylinder.
5. Remove the outer pin (by the spanner flats).
6. Pull the cylinder to the side so that it goes free of the inner pin (which is fixed)
7. Open the cable tie for the position sensor cable.

Position Sensor, First Bow Locked (561c)|Page 1532 > < Position Sensor, First Bow Locked (561c)|Page 1530