9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-692003.png)
7. Remove the sensor using 83 96 087 Sleeve, coolant temperature sensor, B207.
To fit
1. Quickly refit the temperature sensor using a new seal.
Tightening torque 22 Nm (16 lbf ft)
Important
Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information
regarding connectors, refer to Connectors, handling and inspection.
