9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-820003.png)
2. Plug in the connector.
3. Fit the heat shield.
4. Secure the cable to the heat shield.
5. Fit the bracket to the engine and front exhaust pipe.
Tightening torque to engine: 23 Nm (17 ft. lbs.)
Tightening torque to exhaust pipe: 40 Nm (30 ft. lbs.)
Tightening torque to heat shield:
M6 = 9 Nm (6 ft. lbs.)
M10 = 38 Nm (28 ft. lbs.)
