9-3 (9440) V6-2.8L Turbo (2008)
Wiring Harness: Removal and Replacement
Wiring Harness, Boot Lid, CV
Wiring Harness, Boot Lid, CV
To Remove
1. Open the roof until the soft top protector is on the boot lid.
IMPORTANT: Check that the soft top protector is fully down to avoid paintwork damage in the boot lid.
2. Remove the wiring harness from the cabin:
^
Unplug the connectors (A).
^
Remove the cable ties (B).
3. Fold down the soft top protector to its lowest position.
IMPORTANT: Take care to avoid scratching the soft top protector on the hinges.