9-3 (9440) V6-2.8L Turbo (2008)
8. Close the clips (A) for the wiring harness on the left-hand C-pillar.
9. Fit the left-hand rear speaker .
10. Fit the clips (B) for the left-hand side trim and close the inspection cover (A).
11. Fit the headlining.
12. Connect the negative cable of the battery.
13. Set the clock and program any radio code.
14. Cars with pinch protection: Carry out Programming the pinch protection.
Wiring Harness, Roof, 5D
Wiring Harness, Roof, 5D
To Remove
IMPORTANT: Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight
apart to avoid bending the pins.