9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-2799002.png)
9. Place a receptacle under the car. Detach the delivery line (A) and the return line (B) from the steering gear. Plug the lines.
10. Remove the steering shaft joint (C) from the steering gear and remove the clip. Detach the strap and lower the steering gear.
To fit
1. Suspend the steering gear with a 83 95 212 Strap in the rear torque arm.
2. Fit the steering shaft joint (C) to the steering gear. Clean the threads and apply Thread locking adhesive, Loctite 242 to the threads.
Tightening torque 30 Nm (22 ft. lbs.)
Warning
Check that the bolt fits into the groove on the pinion shaft.
