9-3 (9440) V6-2.8L Turbo (2008)
Steering Wheel: Service and Repair
Steering Wheel
To remove
1. Remove Airbag, driver (333D) from the steering wheel.
2. Turn the steering wheel and wheels to the straight ahead position.
3. Remove the connector.
4. Remove the center bolt from the steering wheel and lift off the steering wheel.
To fit
1. Make sure that the wheels are pointing straight ahead. Turn the contact roller so that the pointer is right in the middle of the indicator aperture. Fit
the steering wheel on the steering shaft.
NOTE: Make sure the steering wheel fits the key on the steering shaft.