9-3 (9440) V6-2.8L Turbo (2008)
6. Tighten the adjuster screw nut (A). Make sure that the marking on the adjuster screw ends up in the right position.
Tightening torque 75 Nm + 60 degrees (55 ft. lbs. + 60 degrees)
6. Tighten the adjuster screw nut (A). Make sure that the marking on the adjuster screw ends up in the right position.
Tightening torque 75 Nm + 60 degrees (55 ft. lbs. + 60 degrees)