9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-2829024.png)
Remove the centring tool.
11. Fit the suspension arms to the steering swivel members.
Warning
Press up the pin carefully.
The groove in the pin must be visible in the screw hole in the spindle housing.
If the rubber gaiter is pressed down, it will not seal properly to the swivel pin.
Tightening torque 50 Nm (37 ft. lbs.)
Left-hand suspension arm and cars with xenon lights: Fit the level sensor.
