9-3 (9440) V6-2.8L Turbo (2008)
Stabilizer Link: Service and Repair
Anti-Roll Bar Link, Replacement
Anti-roll bar link, replacement
To remove
1. Raise the car.
2. Remove the appropriate rear wheel.
3. Unplug the wheel sensor connector (A).
4. Remove the anti-roll bar screw (B) from the steering swivel member.
5. Remove the anti-roll bar link:
^
Lubricate the damping rubber with Vaseline, non-acidic.
^
Press the link away from the anti-roll bar using a suitable tool.
To fit
1. Fit a new link to the anti-roll bar: