9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-2138004.png)
^
Engage position N and remove the lever.
^
Pull the gear cable sleeve (C) backwards and lift up the cable and move it aside.
^
Remove the control module screws x 3 (D).
^
Lift the control module off the shaft and connector. Lift straight up to avoid damaging the connector on the gearbox. Turn the control module
away backwards.
5. Remove the wiring harness.
^
Remove the circlip (A).
