9-3 (9440) V6-2.8L Turbo (2008)
Replaced material is returned in accordance with the information shown above.
Marking the modification identity plate (not US/CA)
After carrying out the procedure, box A3 on the modification identity plate must be marked. From and including M04 the car's Warranty and Service
Book contains the "Table of Modifications". Mark the box with the number "7" if the procedure was carried out by the importer or with the number "8"
if carried out by the dealer.
Fitting the modification identity plate (not US/CA)
Note:
A modification identity plate must only be fitted where local directives require the marking of the car.
Fit the modification identity plate in accordance with WIS
9-3 (9440) M04 - General - General - Technical data - Plates and labels
Warranty/Time Information
See separate information.
Fault diagnosis procedure is not available.