9-3 (9440) V6-2.8L Turbo (2008)
4. Detach the cables from the cable retainers on the gearbox by pulling back the locking sleeves.
5. V6: Raise the car
6. Loosen the rubber seal in the bulkhead wall and then the plastic grommet. V6: Lower the car.
4. Detach the cables from the cable retainers on the gearbox by pulling back the locking sleeves.
5. V6: Raise the car
6. Loosen the rubber seal in the bulkhead wall and then the plastic grommet. V6: Lower the car.