9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-2274016.png)
^
Press the locking sleeves backward and remove the cable casings from the bracket (B).
4. Blow clean around the selector unit
5. Remove the selector unit:
^
The selector unit must be in neutral position to enable removal.
^
Remove the bolts (C) and lift up the selector unit.
To fit
1. Fit the sealing ring (A) onto the selector unit.
^
The selector unit must be in neutral position to enable fitting.
