9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-2285003.png)
Important: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further
information regarding connectors, refer to Connectors, handling and inspection.
2. Plug in the control module connector, making sure the gear segment on the side of the connector is engaged. Connect the solenoid cable and the
ribbon cable.
3. Check the operation.
4. Fit the front part of the air duct.
5. Fit the front stay.
6. Fit the right side cover on the center console.
