9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-4884004.png)
10. Thread the ends of the wire into the eye in the awl and bend the ends so that the wire do not slip out.
11. Pull the awl back through the adhesive into the cabin. Pull through roughly 0,7 m of wire.
12. Position the wire under the moulding. Press it in with the help of the plastic tool provided with the kit. Make sure the that the wire lies around all
the corners. Pull in slack and check the position of the wire.
