9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-4885002.png)
8. When changing tailgate: Fit the moulding temporarily and mark the approximate position of the window with a marker pen. This will facilitate
reassembly.
9. When changing a bonded window, use 82 93 714 Kit, window removal tool. If the window is so damaged that it is not possible to affix the suction
cups, use 30 14 099 Cutting wire handles and with the help of a colleague, saw out the window.
WARNING: Use the protective equipment that is supplied with the windscreen removal and adhesive kit, such as the goggles and
protective gloves.
10. Measure up 5,0 m of cutting wire.
11. Insert the awl through the adhesive in the bottom corner inside the window.
