9-3 (9440) V6-2.8L Turbo (2008)
/v6-2.8l_turbo/Page-4894005.png)
4. Fit the nuts and bolt. Fit the upper ones first.
5. Plug in the connector.
6. Fit the front of the window into the U-moulding. Hold the rear edge at an angle so that it locates in the U-moulding. Make sure the window is
located properly in the U-moulding by closing and opening the window.
7. Press down the window so that it rests against the rubberised window mountings (illustration viewed from outside).
