9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
-
Insert a small screwdriver between the front panel and the catches on the ACC unit.
-
Carefully pry the front panel from the catches using the screwdriver. Keep the front panel in position with your hand or with 82 93 474
Removal tool.
-
Continue to pry the next catch until the front panel releases from the unit.
NOTE:
-
If the front panel breaks, replace it with a new panel
-
Note how the buttons are fitted on the ACC unit. Exercise care when removing the buttons so that the display is not damaged. Do not touch the
display.
3. Position the ACC unit as it is fitted in the car on a workbench.
4. Carefully remove all the buttons except the temperature buttons from the ACC unit. Proceed as follows:
-
Press the button inwards (A) and then move the button downwards (B). The button can then be removed.
-
Dummy buttons and buttons for the electrically heated seats (C) must be pressed downwards. The button for the hazard flashers (D) should be
pulled straight out.
5. Remove the temperature buttons using a screwdriver. Press the button inwards towards the centre (A) and carefully lift off the button using the
screwdriver (B), move the button outwards (C) and remove the button.