9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-3121027.png)
On the SID unit is an LED indicating the state of the alarm. The LED is located on the back of SID next to the light sensor, which measures the ambient
light from the front. BCM activates the alarm indicator LED via a wire.
Night Panel
Night Panel is used to minimize distracting light and provide an agreeable illumination in the cabin. When Night Panel is active, expendable information
should be turned off and the brightness of the button illumination turned down.
The following will happen when the NIGHT PANEL button on SIDC is pressed:
-
The brightness of the button illumination will be reduced (from min 65% of max rheostat level).
-
The display lighting in SID and ICM will be extinguished.
-
All gauges on the main instrument unit except the speedometer (which is illuminated up to 140 km/h (90 mph)) will be extinguished. This
function can also be adjusted to full scale lighting using the diagnostic tool.
The tachometer, turbo boost, fuel and temperature gauge needles will fall to their rest position once the illumination has been extinguished.
