9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
3. Saw or cut a groove on either side. Break off the flange from the bush to make room for the support.
4. Cut away the rubber edge protruding from the underside of the bush.
5. Remove the bush using a pull rod 907 and press sleeve KM 907-14 from 89 96 779 Set of press sleeves, front assembly and a support from 89 96
902 Subframe bush set
To fit
Note: Make sure the bush is pressed in straight.