9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-3897008.png)
7.
Connect the detonation device 84 71 104 Cable with switch (B), to the wiring harness.
8.
Place a battery 10 metres behind the seat. Connect the detonation device to the battery.
9.
Check that no one is within the safety distance of 10 metres from the seat. Stand behind the battery and press the switch. When the belt tensioner is
deployed a bang will be heard.
Warning
If the belt tensioner does not deploy on the first attempt, disconnect the detonation device from the battery and examine the wires and battery
thoroughly.
Under no circumstances may parts included in the SRS system be removed from one car to be used in another car.
10.
Disconnect the detonation device's wires from the battery immediately the belt tensioner has been deployed.
11.
Exercise caution when dismantling the connector from the belt tensioner's gas generator as this may be hot. Wear protective gloves.
12.
Connect 86 12 921 Wiring harness, side airbag to connector the under the seat.
