9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
2. Remove the protective backing from the self-adhesive areas along the sides of the heating pad.
Carefully position the heating pad and press the self-adhesive area against the foam cushion. Make sure that there are no folds.
3. Remove the protective backing from the self-adhesive areas at the front of the heating pad.
Carefully position the heating pad and press the self-adhesive area against the foam cushion. Make sure that there are no folds.
4. Fit the relay into the recess in the foam cushion.