saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Seat Latch Cable > < Recall - Front Seat(s) Inspection/Replacement|Page 16720
Page 10
background image

13.

Connect the detonation device 84 71 104 Cable with switch to the wiring harness.

14.

Connect the detonation device to the battery. The battery must be placed 10 metres from the seat.

15.

Check that no one is within the safety distance of 10 metres from the seat. Stand behind the battery and press the switch. When the airbag is
deployed a bang will be heard.

If the airbag does not deploy on the first attempt, disconnect the detonation device from the battery and examine the wires and battery thoroughly.

Under no circumstances may parts included in the airbag system be removed from one car to be used in another car.

16.

Disconnect the detonation device's wires from the battery immediately the airbag has been deployed.

17.

Disconnect the wiring harness from the seat.

Seat Latch Cable > < Recall - Front Seat(s) Inspection/Replacement|Page 16720