9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-2189003.png)
3. Place the hydraulic body into the carrier.
Fit the guide pins.
Tightening torque 28 Nm (21 ft. lbs.)
4. Fit the protective covers.
5. Fit the retaining spring to the brake caliper. Lay the outer contact surfaces against the bracket and push the centre of the clip.
6. Fit the wheel.
Tightening torque 110 Nm (81 ft. lbs.)
7. Lower the car.
8. Depress the brake pedal repeatedly in order to press out the brake pistons.
9. Check the brake fluid level and top up as necessary.
10. Check the operation of the foot brake.
