9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-2205003.png)
4. Fit the retaining spring to the brake caliper. Lay the outer contact surfaces against the bracket and push the centre of the clip.
5. Remove the brake pedal clamp and refit fuse 6 in the instrument panel electrical centre 22.
6. Bleed the brake system.
7. Fit the wheel.
Tightening torque 110 Nm (81 ft. lbs.)
8. Lower the car.
9. Depress the brake pedal repeatedly in order to press out the brake pistons.
10. Check the brake fluid level and top up as necessary.
