9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-2255005.png)
2.
Fit the pipe to the T-nipple on the vacuum pump.
3.
Aut: Fit the gear cable clip.
4.
Fit the vacuum pipe to the clips on the bulkhead partition.
5.
Fit the heat shield on the bulkhead partition.
6.
Connect the exhaust evacuator.
7.
Start the engine and check the function of the brake servo.
