9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
1. Plug in the gyro sensor.
Tightening torque: 10 Nm (7,5 ft. lbs.)
2. Fit the console. Make sure the front bolts align with the markings.
Tightening torque: 10 Nm (7,5 ft. lbs.)
3. Connect the brake cables.
4. Adjust the cables.
5. Fit the air ducts.
6. Fit the floor console.
7. After fitting a new yaw rate sensor: Attach the data link connector and program the unit as follows.
7.a.
Select Diagnostics
7.b.
Select Model Year(s)
7.c.
Select Vehicle Type(s)
7.d.
Select All
7.e.
Select Add / Remove
7.f.
Select Other Components
7.g.
Select YRS
7.h.
Select Add
7.i.
Follow the diagnostic tool instructions
8. Disconnect the diagnostic tool.