9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
2. Fit the heat shield over the turbocharger. Ensure that the clip under the heat shield is fastened to the holder.
3. Connect the ground cable to the camshaft cover.
4. Fit the cable duct on the camshaft cover.
5. Connect the crankcase ventilation hose to the camshaft cover.
6. Refit ignition coils. Start with the ignition coil for cyl. 4.
Tightening torque 8 Nm (6 ft. lbs.).
7. Fit the cover over the ignition coils.