9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-1067001.png)
Drive Belt Tensioner: Service and Repair
Belt tensioner with breaker wheel
To remove
1. Raise the car, twist the wheel out and release the front part of the right wing liner.
2. Relieve the belt tensioner using 83 96 095 Belt circuit relieving tool B207 and remove the belt. Mark the direction of rotation of the belt.
3. Remove the belt tensioner.
4. Remove the breaker wheel.
To fit
1. Fit the breaker wheel to the belt tensioner.
Tightening torque 25 Nm (18 ft. lbs.).
