saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Lighting - High Mount Brake/License Lamps Inoperative|Page 18021 > < Lighting - High Mount Brake/License Lamps Inoperative
Page 2
background image

5.

Connect the cable terminals.

6.

Carefully press the cable terminals into the unit to ensure that they do not make contact with the boot lid.

7.

Fit the boot lid handle unit in accordance with WIS - 8. Body - Doors and locks - Adjustment/Replacement - Bootlid opening handle.

8.

Replace the luggage compartment electrical centre (REC), see "Electrical centre, luggage compartment (REC)", replacement below.

Electrical centre, luggage compartment (REC), replacement

To remove:

Carry out the procedures before removing a control module in accordance with WIS - 3. Electrical System - Wiring harness and components -
Fuse box - Fault diagnosis, general - Procedures before dismantling the control module.

1.

Remove the battery cover.

2.

Detach the battery negative cable.

3.

Open the left-hand side hatch in the luggage compartment.

Lighting - High Mount Brake/License Lamps Inoperative|Page 18021 > < Lighting - High Mount Brake/License Lamps Inoperative