saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Main Components|Page 5468 > < Main Components|Page 5466
Page 11
background image

3. Steering column lock

Turning the ignition OFF locks the steering column. The CIM first checks that vehicle speed does not exceed 5 km/h. The problem here is that the
TC/ABS or ESP and ECM provide the value for vehicle speed. These control modules are connected to the P-bus and there is no communication
on the P-bus when the ignition is switched OFF. To solve this problem, there is a direct lead from the TC/ABS or ESP providing a wheel speed
signal. The TC/ABS or ESP can read the wheel sensor values and transmit a speed signal since it has a separate +X feed (battery voltage with 
ignition switch ON or OFF).

Main Components|Page 5468 > < Main Components|Page 5466