9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
13. Remove the catalytic converter fixing from the engine block and from the catalytic converter.
14. Remove the catalytic converter.
To fit
1. Lubricate the turbocharger studs with 30 20 971 Screw-thread paste
2. Lift up the catalytic converter, position its bracket to the studs on the engine block and position the catalytic converter to the turbocharger
connection.
3. Insert the catalytic converter bracket bolts into the engine block and new nuts on the studs.
4. Lower the car.
5. Fit the catalytic converter with new nuts so that it rests evenly against the turbo.