9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-1716003.png)
3. Lower the car.
4. Fit the bolts to the charge air cooler.
5. Fit the condenser and remove the strap from the condenser and charge air cooler.
6. Fit the bolts on the condenser.
7. Raise the car.
Important: To reduce the risk of hoses mounted on the delivery side of the turbocharger coming loose due to low friction at high air pressures,
the hoses and connecting pieces must be cleaned thoroughly before fitting. Use a rag dampened with 30 15 815 Cleaning agent to wipe clean
inside the ends of the hoses. Clean also the connecting pieces. If hose clips are rusty or damaged, they must be replaced with new ones to maintain
the correct clamping force.
8. Fit the hoses to the charge air cooler and tighten the hose clips.
