9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
Replace faulty remote controls. Do not replace CIM.
Note:
New remote controls were introduced as of VIN 41063613 (4D) and 46019651 (CV).
3.
The key is not accepted.
Cars affected:
Saab 9-3 (9440) 4D up to VIN 41063612
Saab 9-3 (9440) CV up to VIN 46019650
Background:
It is not possible to start the car since the key is not accepted.
DTCs in CIM: B3935 and B3055
Procedure:
Replace the faulty remote control.
Note:
New keys/remote controls were introduced as of VIN 41063613 (4D) and 46019651 (CV).
4.
CIM - DTC C0548 08 and C0549 08
Cars affected:
Saab 9-3 (9440)
Background:
The DTCs can be generated by a voltage drop in the car, e.g. at the workshop or when instructions on battery charger use have not been followed
properly.
Procedure:
If both DTCs have been generated, the cause is a temporary voltage drop in the electrical system. Delete the DTCs and check the function.
Otherwise, follow standard fault tracing in WIS.
5.
CIM - DTC B3948 00
Cars affected:
Saab 9-3 (9440)
Background:
The customer has turned in the car for a steering wheel lock fault.
Procedure:
The DTC is informational and is generated because another DTC is generated in SCL. If no DTC has been generated in SCL, perform a readout
several times until a DTC can be read out (e.g. B1020 30, B1020 31, B1020 32 etc.).
Do not replace CIM.
6.
ISM - Broken key catch
Cars affected:
Saab 9-3 (9440) up to VIN 31007201
Background:
The customer has turned in the car for a steering wheel lock fault. A material fault in the ignition switch can cause the catch between LOCK and
OFF to break.