saab Workshop Repair Guides

Saab Workshop Service and Repair Manuals

Air Bag Control Module|Specifications|Page 11810 > < Air Bag Control Module|Specifications|Page 11808
Page 1
background image

Air Bag Control Module: Service and Repair

Airbag Control Module (331)

WARNING:  Read Safety and handling directives and Before removing a control module before starting work.

Carry out measures before dismantling the control module.

To remove

WARNING: The battery's earth lead is to be removed before the positive lead. Wait at least 1 minute after disconnecting the battery before beginning
any work on the airbags system. Otherwise the airbags may be released unintentionally and this can cause fatal/severe personal injuries.

1. Ignition key in the position LOCK.
2. Removing the passenger seat.
3. Release the handbrake.
4. Remove the centre console's front side panel.

5. Remove the centre console's rear side panel.
6. Remove the centre console's rear cover.
7. Dismantle the connector to the ignition switch.
8. Remove the rear legroom adjuster screws on the centre console's aluminium frame.

Air Bag Control Module|Specifications|Page 11810 > < Air Bag Control Module|Specifications|Page 11808