9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-2933003.png)
hold the Airbag Control Module.
Tightening torque 10 Nm (7 lbf ft)
IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further
information regarding connectors, refer to Connectors, handling and inspection.
2. Fit the two connectors to the Airbag Control Module.
3. Remove the wedge.
4. Fit the front legroom adjuster screws on the centre console's aluminium frame.
NOTE: Adjust the centre console so that it aligns with the front panel by using the adjuster screws.
5. Fit the rear legroom adjuster screws on the centre console's aluminium frame.
6. Fit the connector to the ignition switch.
7. Fit the centre console's rear cover.
