9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-2639002.png)
9. Place a receptacle under the car. Detach the delivery line and the return line from the steering gear. Plug the lines.
10. Remove the heat shield from the steering gear.
11. Remove the steering gear bolts, nuts and washers.
12. Twist up the anti-roll bar as high as possible and lift out the steering gear through the wheel housing on the passenger side.
To fit
1. Lift the steering gear into place through the wheel housing on the passenger side.
2. Fit the steering gear to the subframe.
Tightening torque 50 Nm +60° (37 ft. lbs. +60°)
3. Fit the heat shield to the steering gear.
4. Fit the delivery line and return line to the steering gear. Fit new O-rings.
Tightening torque 28 Nm (21 ft. lbs.)
