9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
Figure 1
3.
Brush clean the bolt using a wire brush and blow clean with compressed air.
4.
Clean out the threads in the joint with a thread tap M8 x 1.25. Blow clean with compressed air.
5.
Apply 74 96 268 Thread locking adhesive to the bolt.
6.
Fit the bolt.
Tightening torque 30 Nm (22 lbf ft)
7.
Fit the sound insulating baffle on the driver's side, see WIS Group 8 - Interior equipment - Adjustment/Replacement - Sound insulating baffle,
driver's side.