9-3 Arc/Aero (9440) L4-2.0L Turbo (2.0 T) (2004)
/l4-2.0l_turbo_(2.0_t)/Page-2651002.png)
3. Screw on the track rod end the same number of turns as when it was removed.
Note: The left and right track-rod ends are different. The track rod ends should curve slightly backwards when fitted. Markings: L = left-hand
side, R = right-hand side.
4. Bolt the track rod end to the steering swivel member.
Tightening torque 35 Nm (26 ft. lbs.)
5. Tighten the track rod end's locknut.
Tightening torque 70 Nm (55 ft. lbs.)
6. Fit the wheel.
Lower the car to the floor.
7. Check the toe-in and adjust if required.
